Breakthrough Envelope
Sealing Technology

Aerobarrier - A cutting edge envelope sealing system that measures and seals building envelope air leaks.

licensed partner AeroBarrier Vancouver Lower Mainland Sea to Sky

Servicing the Lower Mainland, North Vancouver, West Vancouver, Vancouver, Burnaby, Whistler, Squamish and the Sea-to-Sky Corridor!

Never fail another blower test - GUARANTEED.

AeroBarrier is made for builders, making it easy and economical to seal the building envelope and make your homes more energy efficient.

Aerobarrier - A Game Changing Solution

AeroBarrier is a convenient, cost effective approach that seals homes in less than 3 hours and provides verification that the air-tightness requirement has been achieved.

We help builders in Vancouver, the Lower Mainland and the Sea-to-Sky Corridor improve the performance of their homes and meet any ENERGY STAR®, LEED or Net Zero requirement more consistently and more importantly, more cost-effectively than traditional envelope sealing methods.

Measure_icon1

Measure Results

As AeroBarrier is applied to your project, the results are displayed in real time. By incorporating a blower door, the AeroBarrier system is able to target and hit your desired Air Changes per Hour (ACH). It is that easy and it is guaranteed. At the end of the process, we provide you with a report that documents the process and the air leakage improvement.

easy_application_icon

Easy to Apply

From start to finish, the sealing process takes 1-2 hours.  In new construction applications, prep and clean up time is minimal – typically taking less than an hour. Once set up, the AeroBarrier machine takes over and manages the sealing process through completion. 
The AeroBarrier equipment is portable and easily transported in a small trailer.

money_icon

Save Money

Using a blower door, the AeroBarrier system gets leakage readings in real-time allowing us to stop the process once the target is hit.  Saving time, material, and labor cost.  With AeroBarrier there is no more guesswork or rework, hoping you hit your desired leakage. AeroBarrier hits the desired leakage, guaranteed! 

How AeroBarrier Works

AeroBarrier is an interior applied air sealing system that seals all building envelope leaks. The waterborne acrylic sealant is applied by pressuring a targeted building area, then spraying the aerosolized sealant into the pressurized space.

The sealant is applied within 60-90 minutes and dries before system cleanup is complete, allowing construction to resume shortly after the process is complete. The system measures the envelope leakage in real-time, enabling the system to dial-in specific requirements for air leakage and guarantee the results.

Aerobarrier Vancouver Technician
Play Video

TESTED AND PROVEN RESULTS
- THE 5-STEP PROCESS -

The entire AeroBarrier process, from setup to completion, takes only a few hours for a typical single-family home.
The system measures the envelope leakage in real-time, enabling the system to dial-in specific requirements for air leakage and guarantee the results.

Aerobarrier Vancouver Truck
Step 1

Setup Equipment

Equipment is set up at the job site. Conveniently transported by trailer, AeroBarrier install equipment is mobile and portable. The equipment includes a compressor, generator, blower door, emitters, hoses, and the AeroBarrier machine.

Aerobarrier Spray application
Step 2

Prep the Area

Prep the space. This includes taping or covering any areas that won’t be sealed. Emitters are then set up throughout the area to be sealed.

Aerobarrier Spray
Step 3

Pressurize

Pressurize the space with the use of a blower door. A computer does the rest, including the control of temperature, pressure, humidity, and distribution of sealant during the process.

Aerobarrier Vancouver results monitor
Step 4

Real-Time Results

See the results in real-time. Throughout the application process, the computer monitor displays the ACH improvement, allowing you full control over your desired level of envelope tightness and the leakage reduction.

Sealing-Results
Step 5

Analyze

Run a final blower door test to verify the sealing results. At the end of the process, receive an AeroBarrier Certificate, with a pre and post leakage report.

Aerobarrier Vancouver Application
Play Video

Watch the Video of the AeroBarrier Envelope Sealing Process!

  • Seals leak up to ½” and as small as a human hair.
  • Most economical to install at rough in or drywall stage of construction but can be applied to unoccupied, finished spaces.
  • In Multifamily applications, a tighter building envelope offers reduction in noise transmission, mitigates odor transfer, reduces pest migration and enhances climate control.
  • Does not stick to vertical surfaces like walls, windows, or doors.
  • AeroBarrier is UL GreenGuard Gold certified and is safe to use in any type of building.
  • Ultra-Low VOC and has no off-gassing.
Aerobarrier Before and after application During Blower Door test
before/after

CONTACT US !

We love hearing from Builders, Architects, Dealers, and others who are interested in AeroBarrier.

Schedule AeroBarrier
for your Next Project!

Please email us or call to discuss your upcoming projects and to learn more about our services.

Servicing the Lower Mainland, North Vancouver, West Vancouver, Vancouver, Burnaby, Whistler, Squamish and the Sea-to-Sky Corridor!

1390 Alpha Lake Rd #203
Whistler, BC V8E 0H9

Email: hello@airtightsolutions.ca
Phone: 778-222-1196

Follow us on social media for further updates
and news releases!

Aerobarrier Vancouver, Whistler, Sea-to-Sky, Lower Mainland BC